. 01 – Egire Egire – Clinton Creejo, Hemachandra, Raman Mahadevan, Shilpa Rao
. 02 – Aanandama – Shankar Mahadevan, Shreya Ghoshal
. 03 – Abacha – Mahalashmi Iyer, Shilpa Rao
. 04 – Konchem Ishtam – Shankar Mahadevan

use FreeDownload manager to download fastly
(u have to just drag these independent songs in to its window)

Hi guys…here I found a tutorial of another stuff:
INFO: Text not written by me (i did not still try this)!

Okay, these are some methods to backup PS2 titles and Xbox titles, in order to play a backup you need a modchip of some sort, I have also included a tutorial on boot methods. Follow any one of these instructions to fit your needs. You can tell what format the PS2 title is by looking at the written side of the disc, DVD’s are Silver and CD’s are Purple. The DVD backup methods here consist of reading the image to the hard drive then burning it to the media for an easier backup, this depends on your hardware and it?s setup. I say that because the proper setup would be to have the Reader and Writer on separate IDE cables. This allows no cross information when doing Disc to Disc/On the fly copying. But, since most people would not know how to check or fix this, I suggest reading the image to your Hard Drive and then burning from there. *A little useful trick*, If the DVD backup “image” is small enough in size you can fit it onto a CD-R (80 minute or larger if need be) instead of using a more expensive DVD-R. I have done this succesfully using Prassi and the first tutorial for it below. In addition a DVD Movie backup will play on a PS2/Xbox without a chip. As I get more info I will update. Dexter

Using CloneCD (v4.x.xx) for PS1/PS2

1. Start CloneCD
2. Select “Copy CD”
3. Select your Reader, press Next
4. Select “Game CD”, press Next
5. Select/Deselect your options here (on the fly, cue or delete) then press Next
6. Select your Writer, press Next
7. Select your burn speed and “Game CD”
8. Press “OK” to begin

Using Alcohol 120% for PS1/PS2

1. Start Alcohol 120%
2. Select ?Copy Wizard?
3. Select your Reader & Read Speed
4. Select or Deselect ?Copy current disc on the fly?
5. For Data type select which console PS1 or PS2, press Next
6. Select your Image location and Name for it, press Next
7. Select you Writer, Write Speed and anything else you feel you might need
8. Make sure the Data type selected is the same you chose above
9. Press Start to begin

PS2 DVD backup tutorials

Using Prassi

1. Start Primo
2. Select “go to full application”
3. Right Click the drive that has your original in it
4. Select “build global image” and choose a path for the image (preferably on an NTFS opsys)
5. After the image is extracted go to next step
6. Choose the 3rd disc icon from the left *or* click file, new job, Global/Other Image
7. Then just burn the .gi (global image) of the game

This next way has one less step which saves some time because once you press record it does everything by itself (if you have a DVD reader and DVD Writer)

1. Start Primo
2. Use the “PrimoDVD Starter” (it’s easier, and less confusing)
3. Choose “disc copy”
4. Select your Reader and Also your Writer
5. Select “make a temp image on HD…”
6. Select your burn speed and then record to begin

Using Nero

1. Start Nero, Use the Wizard (for easy use)
2. Select “DVD” then select Next
3. Select “Copy a DVD” then select Next
4. Select your source drive
5. Check OFF “copy on the fly” then select next
6. Select your write speed
7. Select either “Test”, “Test and Burn” or “Burn”
8. Press “Burn” to begin

This next way is without the Wizard

1. Start Nero, and select “File” then “New…”
2. On upper left side of the window from the drop down menu select “DVD”
3. Select “DVD Copy” Icon
4. Select “Copy options” tab
5. Check OFF “copy on the fly”
6. Select source drive and read speed
7. If needed Select “Image” tab to choose image directory and select/deselect “delete image…”
8. Select “Burn” tab and choose your settings
9. Press “Copy” to begin

Using Alcohol 120%

1. Start Alcohol 120%
2. Select ?Copy Wizard?
3. Select your Reader
4. For ?Separate Image file every:? choose ?Never Separate?
5. Select or Deselect ?Copy current disc on the fly?, press Next
6. Select your Image location and Name for it, press Next
7. Select you Writer, Write Speed and anything else you feel you might need
8. Select or Deselect ?Delete image file after recording?
9. Press Start to begin

XBOX backup tutorials

Xbox original games are burned from the outside in. The only way to backup a title is to have a modchip like X-exuter (best), Enigma, or Xodus/Matrix. You also have to flash the bios and have a CD program inserted or installed into the X-Box named EVO-X (this allows you to assign the X-Box an IP address). The game has to be stored on the X-Box’s HD, this allows you to file transfer the title to your PC using an ftp program like FlaxhFXP (best) or similar. From there you use a burning application to make the backup. Some applications allows you to “drag & drop” right from the Xbox or you can build an ISO of the image then burn to CD-R/W or DVD-R/W backup. (I will update this to show steps as soon as I have a minute)

Modded PS2 with or without Action Replay/GameShark CD & DVD backup booting methods

PS2 with NeoKey/Sbox & AR/GS, PS1 CD backup booting

1. Turn on PS2 and NeoKey/Sbox
2. Press Eject
3. Insert PS1 CD backup
4. Press reset
5. PS2 tray will close
6. PS1 CD backup will now boot

PS2 with NeoKey/Sbox & AR/GS, PS2 CD backup booting

1. Have AR/GS dongle in a memory card slot
2. Power on your PS2
3. Insert AR/GS disc
4. At the AR/GS menu, select Start Game, With/Without codes
5. Eject and swap to your PS2 CD backup and press X.
6. Screen will change and game will now boot

* Note – Neokey will not play DVD-R!
* Note – Old versions of AR2/GS2 you might need to press R1+O instead of X to boot games

PS2 with Neo 2.2, PS1 CD backup booting

1. Turn on PS2
2. Press Eject
3. Insert PS1 CD backup
4. Press reset
5. PS2 tray will close
6. PS1 CD backup will now boot

PS2 with Neo 2.2 & AR/GS, PS2 CD backup booting

1. Have AR/GS dongle in a memory card slot
2. Power on your PS2
3. Insert AR/GS disc
4. At the AR/GS menu, select Start Game, With/Without codes
5. Eject and swap to your PS2 CD backup and press X.
6. Screen will change and game will now boot

PS2 with Neo 2.2 & AR/GS, PS2 DVD backup booting

1. Have AR/GS dongle in a memory card slot
2. Power on your PS2
3. Insert AR/GS disc, close tray
4. Power off your PS2, wait a few seconds
5. Press and Hold Reset button to load AR/GS
6. At the AR2/GS2 menu, press EJECT while still holding Reset
7. Swap AR/GS disc for an Original-TOC-DVD* and wait 10 seconds
8. Select “AR/GS Codes”
9. Highlight “Add new code” and press X to get to the next screen
10. Press X three times. You will see “Updating code list please wait” each time)
11. Press “Start” on controller
12. Select “Without codes”, press X
13. Then Press X again, and immediately release the Reset button, you will see “Updating code list please wait”
14. The PS2 tray will eject allowing you to swap Original-TOC-DVD* for DVD backup and then close on it?s own
15. Screen will change and game will now boot

* Note – “Original-TOC-DVD” is an original DVD that is a larger file size than the backup
* Note ? For a shortcut make a few ?Add new codes? and after step 8 just highlight one of them and press square to delete it, then proceed on with step 11

PS2 with Messiah

1. PSX Backups will boot directly.
2. PS2 CD-R Backups will boot directly.
3. PS2 Unpatched EA backups will boot directly.
4. PS2 DVD-R Backups will boot directly.

PS2 with Magic 2, 3 or 3.5

1. PSX Backups will boot directly.
2. PS2 CD-R Backups will boot directly.
3. PS2 Unpatched EA backups will boot directly.
4. PS2 DVD-R Backups will boot directly.

Ps2 with Apple Mod

1. PSX Backups will boot directly.
2. PS2 CD-R Backups will boot directly.
3. PS2 Unpatched EA backups will boot directly.
4. PS2 DVD-R Backups will boot directly.[CODE]

Most programs run properly on Windows XP. The exceptions are some older games and other programs that were written specifically for an earlier version of Windows. To run your program on Windows XP, you can try the following, Run the Program Compatibility Wizard. As an alternative, you can set the compatibility properties manually. Update your program, drivers, or hardware. These options are covered in detail below.

The Program Compatibility Wizard
This wizard prompts you to test your program in different modes (environments) and with various settings. For example, if the program was originally designed to run on Windows 95, set the compatibility mode to Windows 95 and try running your program again. If successful, the program will start in that mode each time. The wizard also allows you to try different settings, such as switching the display to 256 colors and the screen resolution to 640 x 480 pixels. If compatibility problems prevent you from installing a program on Windows XP, run the Program Compatibility Wizard on the setup file for the program. The file may be called Setup.exe or something similar, and is probably located on the Installation disc for the program. To run the Program Compatibility Wizard click Start, click Help and Support, click Find compatible hardware and software for Windows XP, and then, under See Also in the navigation pane, click “Program Compatibility Wizard.”

Set the compatibility properties manually
As an alternative to running the Program Compatibility Wizard, you can set the compatibility properties for a program manually. The settings are the same as the options in the Program Compatibility Wizard. To set the compatibility properties for a program manually Right-click the program icon on your desktop or the shortcut on the Start menu for the program you want to run, and then click Properties. Click the Compatibility tab, and change the compatibility settings for your program.

The Compatibility tab is only available for programs installed on your hard drive. Although you can run the Program Compatibility Wizard on programs or setup files on a CD-ROM or floppy disk, your changes will not remain in effect after you close the program. For more information about an option on the Compatibility tab, right-click the option and then click “What’s This.”

Update your program or drivers
If your program does not run correctly after testing it with the Program Compatibility Wizard, check the Web for updates or other fixes, as follows:

Check the Web site of the program’s manufacturer to see if an update or patch is available.
Check Windows Update to see if a fix is available for the program.
Click Home on the menu bar of Help and Support Center, then click Windows Update in the right pane.

If the program is a game that uses DirectX, ensure that you are using the latest version of DirectX. In addition, check the Web site of the manufacturer of your video card or sound card to see if newer drivers are available for either of them.

it in KGB format it takes 5-6 hours on a 256 mb RAM, to compress 1 GB data/movie in less than 10 MB……….
if u do it in ZIP format it takes 6-7 hours on a 256 MB ram, but i tell u its worth because WINRAR & WINZIP both can decompress it in seconds..
.Run the application>> It asks for which file u wanna compress>>
select the file>>
after u select>> you get two options in which format u want to compress it>>
select ZIP format ( I prefer ) >> and then set compression level to maximum (maximum the compression level , small the size of it will be compressed)>> Just ignore the time given below it because its just useless……. There is option that you can auto shutdown your computer after the compression is over..

Casting : Ram , Hansika , Sheela, Sunil etc.
Music : Chakri | Director : B Gopal | Producer: M.S.Raju
MASKA MP3 songs Download
rapidshare links
128kbps ~ 320Kbps
other links
use this software to download below link much faster
FreeDownload manager
(just directly drag these lines into free download manager)
song wise:
Hare Hare Rama
Gunde Godarila
Kaloki Dilloki
Kalaganana kalagannana
AaVaipunna EeVaipunna
Bhagadad Gajadongai Vasata

The command processor CMD.EXE (how to open it?)comes with a mini-calculator that can perform simple arithmetic on 32-bit signed integers:

C:\>set /a 2+2
4
C:\>set /a 2*(9/2)
8
C:\>set /a (2*9)/2
9
C:\>set /a “31>>2″
7

Note that we had to quote the shift operator since it would otherwise be misinterpreted as a “redirect stdout and append” operator.

For more information, type set /? at the command prompt.

visit blog